The original rubber bushing is proven to be a weak link that can fail prematurely, allowing chassis geometry to be compromised. Symptoms include suspension movement during acceleration, braking and cornering. The powerflex black series bushing is manufactured of a more dense rubber than the original. It is a 95 shore compound that is more resistant to load than standard rubber which provides better control of chassis geometry for track use. Features: designed for track use improved track handling more precise and accurate alignment constant steering geometry increased tire life better steering feedback longer service life of suspension components less nvh (noise vibration hardness) than polyurethane bushings pl...(choose a part on the right to read more)

Enhance steering precision and steering feedback by simply replacing your original tie rods. Turbo tie rods use a spherical inner joint instead of soft rubber bushings. They offer quicker steering response, more sensitivity and more precision. These are standard length we highly recommend them for lowered vehicles with bump steer kits like part # FVD34791100 or FVD347911930 . We also offer turbo tie rods in longer lengths for other applications, check part # FVD34791180r and FVD34791181ry this kit is manufactured in Germany by an OEM supplier, made from high carbon steel and 7075 t6 aluminum. Kit includes: 2 qty. Outer tie rods 2 qty. Inner tie rods 2 qty. Spacing washers 2 qty. Boots 2 qty. Castle nuts 2 qty. ...(choose a part on the right to read more)

We are committed to Porsche cars and are very happy to release an inner tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 032 00. We also suggest replacing your outer tie rods, part # 96434703200 (qty. 2 are needed) and now is also a good time to replace your worn out inner tie rod dust bellows, part # 96434719103. Please note: this is not for the ...(choose a part on the right to read more)

If you are experiencing clunking or popping sounds and difficulty turning the steering wheel, then inspect your steering intermediate shaft universal joints right away. Genuine part sourced from Porsche ag in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 032 00. This is ideally suited for use with our monoball inner tie rod, part # 96434705805sp for the 964 c2 / turbo look or 965 or part # 96434705804sp for the 964 c4 or rs. Please note: this is not for the wide body. Sold indiv...(choose a part on the right to read more)

The bbi autosport Porsche 996/997 turbo clutch slave cylinder conversion kit is a direct replacement part that eliminates the problematic factory power-assist system for improved reliability and pedal feedback. The factory power-assisted clutch system has always been the achilles heel for the Porsche 997 turbo. Utilizing the power steering system to help reduce the force needed to depress the clutch pedal, it is a flawed design that delivers a mushy pedal feel with poor feedback, and is highly prone to failure.

Unlike other kits, the bbi autosport kit is designed be used with OEM clutch master cylinder, hose, and spring pack. This eliminates the need for additional parts, making our kit a complete plug an...(choose a part on the right to read more)

We are committed to Porsche cars and are very happy to release an inner tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM number, 964 347 058 05. We also suggest replacing your outer tie rods, we have a uniball option, our part # 96534703200sp or the OEM style, narrow body is part # 96434703200 or wide body is part # 96434703201 (qty. 2 are needed) and now is also...(choose a part on the right to read more)

This steering rack is a remanufactured part with a core, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and resell-able, the core deposit will be refunded. The remanufacturing process includes full inspection and testing for structural integrity. We then disassemble and bead blast to remove corrosion. Internals are micro-finished to OEM specifications. Sealing surfaces are carefully checked and restored prior to installing new premium seals and o-rings. Each unit is then carefully tested for full functional...(choose a part on the right to read more)

If your tie rod is worn, you will experience sloppy steering response and knocking / creaking sounds. Your tie rod keeps the steering centered, so failure can be dangerous and can seriously affect steering control. After replacing the tie rods, you will experience tighter, more precise feedback without noise. Tie rod consists of: 1 qty. Tie rod 1 qty. Hexagon nut (m14 x 1.5) 1 qty. Inner axial joint 1 qty. Lock nut we recommend replacing the right and left side tie rods at the same time. We also recommend replacing the bellows, part # pcg419831c sold individually. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please ...(choose a part on the right to read more)

If you are running 17" or 18" wheels, this is a must. It limits the steering angle so that the tires will not rub the chassis. It mounts on the inner tie rod nearest the steering rack. This is a direct replacement / alternative for Porsche part # 964 347 325 02. Made in Germany. Sold individually. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Replace worn-out original front lower control arm bushings to return your car to its intended suspension geometry and steering feedback. Features: better handling reduces that sloppy steering feel does not produce any noise like the teflon bushings. Rubber has the original shore hardness value of 65 (like oem) fit's like oem, simple installation made in Germany if you are looking for a sportier upgrade we suggest our sport lower control arm set, part # FVD34391192set. Set is sold per axle. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM part number, 965 347 032 00. Sold individually. 2 needed per car. We also suggest replacing your inner tie rod, we have a uniball option, our part # 96434705805sp (qty. 1 is needed) and now is also a good time to replace your worn out inner tie...(choose a part on the right to read more)

This kit contains everything needed to install your steering rack. Contains OEM parts. 1 needed per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Prevent premature steering rack failure by replacing a torn or worn boot or bellow. We recommend replacing this boot with a new steering rack or tie rod installation. High-quality OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 2 necessary per car. Please note: please check the model fitment tab to ensure accurate fitment.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Momo steering wheels provide a stylish but functional upgrade to your driving experience. Momo wheels are specifically designed to improve your grip on the wheel for better car control. Momo steering wheels feature leather or suede rims, anodized aluminum centers, and contoured thumb and palm indents. Most of the wheels we sell are in a 350mm diameter. The 350 size is well-suited for a street-driven car with slightly quicker steering response, good sight lines to the instruments, and a comfortable position. This wheel features top grain leather with airleather grips. For the full effect add a momo race shift knob in airleather (part rracair) or aluminum/airleather (part rmbk28).

All momo steering wheels requ...(choose a part on the right to read more)

General Fitment

Momo steering wheels provide a stylish but functional upgrade to your driving experience. Momo wheels are specifically designed to improve your grip on the wheel for better car control. Momo steering wheels feature leather or suede rims, anodized aluminum centers, and contoured thumb and palm indents. Most of the wheels we sell are in a 350mm diameter. The 350 size is well-suited for a street-driven car with slightly quicker steering response, good sight lines to the instruments, and a comfortable position. This wheel features top grain leather with alcantara insert and chrome accents. Order the matching GTr 2 shift knob for the full effect (part number rmbk35).

All momo steering wheels require the use of a ...(choose a part on the right to read more)

General Fitment

Momo steering wheels provide a stylish but functional upgrade to your driving experience. Momo wheels are specifically designed to improve your grip on the wheel for better car control. Momo steering wheels feature leather or suede rims, anodized aluminum centers, and contoured thumb and palm indents. Most of the wheels we sell are in a 350mm diameter. The 350 size is well-suited for a street-driven car with slightly quicker steering response, good sight lines to the instruments, and a comfortable position. This wheel features top grain leather with alcantara insert and chrome accent rings. Order the matching nero shift knob for the full effect (part number rmbk29).

All momo steering wheels require the use o...(choose a part on the right to read more)

General Fitment

Momo steering wheels provide a stylish but functional upgrade to your driving experience. Momo wheels are specifically designed to improve your grip on the wheel for better car control. Momo steering wheels feature leather or suede rims, anodized aluminum centers, and contoured thumb and palm indents. Most of the wheels we sell are in a 350mm diameter. The 350 size is well-suited for a street-driven car with slightly quicker steering response, good sight lines to the instruments, and a comfortable position. This wheel features top grain leather with black chrome inserts and gotham embroidery. Order the matching gotham shift knob for the "full effect" (part number rmbk30).

All momo steering wheels require t...(choose a part on the right to read more)

General Fitment

Italian momo shift knobs are the finest accessories your could add to your Porsche. Made from the finest materials- leather, wood, or metal- these shift knobs add that extra accent and are shaped to be pleasing to the hand as you row through the gears. All knobs are universal designs that fit your Porsche perfectly. Aluminum with airleather. For the full effect add a momo race steering wheel (part rmb3520)

Note: 924/944/968 models need knob adaptor (part r912690). 928 models need knob adaptor (part r912665)
Fits all Porsche models; 914, 944, 9442, 911, 912, 996, Boxster, 986, 987, 997, 996t, turbo, 930, 356, 924, 968, 928, Cayman, Cayenne

General Fitment

Italian momo shift knobs are the finest accessories your could add to your Porsche. Made from the finest materials- leather, wood, or metal- these shift knobs add that extra accent and are shaped to be pleasing to the hand as you row through the gears. All knobs are universal designs that fit your Porsche perfectly. Leather and dark chrome metal. Order the matching gotham steering wheel for the "full effect" (part number rmb3507).

General Fitment

Italian momo shift knobs are the finest accessories your could add to your Porsche. Made from the finest materials- leather, wood, or metal- these shift knobs add that extra accent and are shaped to be pleasing to the hand as you row through the gears. All knobs are universal designs that fit your Porsche perfectly. Leather and metal. Order the matching nero steering wheel for the full effect (part number rmb3519).

Note: 924/944/968 models need knob adaptor (part r912690). 928 models need knob adaptor (part r912665)
Fits all Porsche models; 914, 944, 9442, 911, 912, 996, Boxster, 986, 987, 997, 996t, turbo, 930, 356, 924, 968, 928, Cayman, Cayenne

General Fitment

Italian momo shift knobs are the finest accessories your could add to your Porsche. Made from the finest materials- leather, wood, or metal- these shift knobs add that extra accent and are shaped to be pleasing to the hand as you row through the gears. All knobs are universal designs that fit your Porsche perfectly. Leather with chrome metal. Order the matching GTr 2 steering wheel for the full effect (part number rmb3508).

Note: 924/944/968 models need knob adaptor (part r912690). 928 models need knob adaptor (part r912665)
Fits all Porsche models; 914, 944, 9442, 911, 912, 996, Boxster, 986, 987, 997, 996t, turbo, 930, 356, 924, 968, 928, Cayman, Cayenne

General Fitment

All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

All motorsport and racing parts are special order items. Special order items must be paid for in advance. Special order items are sold on a non-cancelable, non-exchangeable, non-returnable, non-refundable basis and do not carry any warranty. No exceptions.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

There is a core charge, which is refundable upon receiving your rebuildable part.

View/Change Diagram

924 1980-85 - Front Axle/Steering	924 1986-88 - Front Axle/Steering
944 1982-85 - Front Axle/Steering